Beijing Globalipl Development Co.,Ltd
|
Place of Origin: | Beijing, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
10.6μm Infrared Hyper-pulsed Co2 Fractional Laser Beauty Machine US800
I.Theory
Unlike traditional laser, fractional laser will only cover part of the skin tissue, leaving the surrounding tissue intact, and then cause a series biochemical reactions inside the skin, thus to reach the results of skin lifting & resurfacing, pigments and scar removal, etc, finally let the skin return to young again. The unaffected areas act as a reservoir for more effective and rapid tissue healing and collagen production, thus lift the skin and removes speckles and pigments.
a) Red areas are the zones of ablation in fully ablative standard resurfacing, which need longer healing time;
b) Red areas are the microscopic treatment zones (MTZs) of fractional photothermplysis (FP) and the blue areas are the bridge of intact, unaltered skin which will stimulate collagen production, thus faster recovery as well as enhance effective.
c) White dots are fractional laser on skin.
IIApplications:
1. Skin renewing and resurfacing
2. Wrinkle removal, skin tightening
3. Acne and acne scar removal
4. Smooth burnt scars and surgery scars, etc
5. Remove intractable chloasmas and pigmentation
6. Sun damage recovery
III. Features:
1. Particular designed intelligent laser control system ensures a precise treatment
2. Laser energy shooting is an even steady and safe treatment process.
3. Wide range application, effective treatment
4. Easy and fast treatment, no down time.
IV. Parameters:
Basic specification |
|
Wavelength |
10.6μm, far-infrared laser |
Control |
LCD 8.4 inch |
Pulse frequency |
33.3 Hz |
Duration |
0.1~10 ms |
Distance |
0.1~2.6 mm |
Interval |
0~6s |
Repeat |
1~5000ms |
overlap |
1~20 times |
Average power |
40W |
Working mode: |
Continuous pulse, single pulse, interval pulse |
Scan Graphics |
Square, rectangle, round, triangle, oval, 6-diamond shape, line |
Dot quantity |
400 dots at most |
Working state |
Hyper-pulsed mode |
Scan mode |
Sequence scan, Random scan, maximum distance scan |
Pulse energy |
10mj to 130mj is optional for each dot. |
Technical specification |
|
Condenser focus |
f=50mm |
Beam divergence angle |
0.3 mrad |
Spot size |
0.2 mm |
Aiming beam |
Less than 2mW, 635nm red semiconductor laser |
Cooling system |
Closed loop circulating water + air cooling |
Environment temperature |
5-400C |
Relative humidity |
80% |
Temperature in transit |
-40-500C |
Humidity in transit |
85% |
Beam transport device |
Articulated arm with 7-joint and balance weight |
Atmospheric pressure |
86.0kpa-106.0kpa |
Warming up time |
2 min |
Electromagnetic requirement |
No electromagnetic |
Field interference |
|
N. weight (kg) |
55kg |
Power supply
Didn't find what you're looking for?
Post Buying Lead or contact
HiSupplier Customer Service Center
for help!
Related Search
Infrared Sauna
Infrared Sensor
Infrared Camera
Infrared Heater
Infrared Thermometer
Infrared Lamp
More>>
Find more related products in following catalogs on Hisupplier.com |